Omron ZR-RX70, Руководство пользователя

Страница: 63 / 127

Setting Menus
ZR-RX70 User’s Manual
3
SETTINGS AN
D
MEASUREMENT
61
(1)-5 Misc.
Logic and Pulse settings
Specifies the digital input settings.
(1)-6 Logic/Pulse
Selects the digital input processing method.
• If a message appears, follow the instructions by reducing the number of digits to be output by one, or leaving the
number of digits as is and changing the EU value.
• The Scaling operation is calculated using a ratio of the Meas. Value or EU Output Value settings.
“++++/- - - -” is displayed when the converted value cannot be processed by MT100.
Span may be changed according to the value set for Scaling.
Setting Description
(1) Span Sets the upper and lower limits of the span in which waveforms should be displayed.
(2) Annotation Sets an annotation (comment) to be displayed for each channel.
The annotation can be 31 characters long at the maximum.
You can use alphanumeric and kana characters and symbols.
For details on text input, see p.88.
(3) Waveform color setting Red/Green/Blue (RGB) 0 to 31 available for each color
(4) Perform Auto Zero ADJ Performs calculation using the current input voltage as the zero position voltage value.
(5) Reset Auto Zero ADJ Cancels the zero position voltage value and displays the input voltage.
(6) [Zero Position Voltage
Value]
Displays the zero position voltage value (display only).
Setting Description
Off Disables the measurement of digital input.
Logic Digital input is processed as logic signals.
Pulse Digital input is processed as pulse signals.
Note
Meas. Value EU Value
+5.000 +20.00
–5.000
Upper Value
Lower Value
–20.00
Dec pt
+xx.xx
Unit
rpm
+5V
CH.1 10V
–5V
+20.00 rpm
CH.1 Scaling 1
–20.00 rpm
Setting Example