Omron ZR-RX70, Руководство пользователя

Страница: 20 / 127

Operating Environment
18
ZR-RX70 User’s Manual
Operating Environment
This section explains the operating environment for the ZR-RX70.
See “Precautions for Safe Use” p. 6
See “Precautions for Correct Use” p. 7
Warming-up Before Use
The ZR-RX70 should be allowed to warm up with the power turned on for approximately 30 minutes to ensure
that it operates according to the specified performance.
Configuration When in Use
Use the ZR-RX70 standing upright or at an angle, being set on the stand.
Do not block the air vent on the ZR-RX70, as this will cause malfunctioning. Measurement accuracy may not be satis-
factory if the system is used in a condition other than described above.
Use both the stands of the ZR-RX70 when you use it at an angle. Otherwise, the unit will fall down. Open both the
stands before use as shown in this figure.
Condensation occurs in the form of water droplets on the device surfaces and interior when the ZR-RX70 is moved
from a cold to a warm location. Using the ZR-RX70 with condensation will cause malfunctioning. Wait until the con-
densation has disappeared before turning on the power.
Note
Standing upright Standing at an angle, being set on the stands How to open the stands
90 degrees
Important