B-57
Z550
Z550
Multi-Dimensional Sensor
Z550
• Inline profile inspections for workpiec-
es made of metal, plastic, or other ma-
terials all at one time
Features
Width
Measuremen
t
width:
70 m
m
Measuremen
t
width:
70 m
m
Long distance:
210 mm
Measurement
height: 60 mm
Measurement
height: 60 mm
Turn
into precise numeric
evaluation criteria!
Height
Cross-
sectional area
Inclination
High-precision Measurements Over a Wide Area
High-precision Measurements Over a Wide Area
Cross-sectional Measurements without
Moving the Sensor or Target Object
Cross-sectional Measurements without
Moving the Sensor or Target Object
Complete Measurement Menus
Complete Measurement Menus
OMRON's unique 2-dimensional SW-CCD element and light
sensitivity control ensure consistent measurements even on
workpieces with curves and other surface shapes.
This window is a conceptualization and not an actual window.
Workpiece shape and measurement
results can be checked at a glance.
Image Monitor
Scn 0
Run
99.60ms
NEAR
OUT 0
S+
←
/
→
: Display S+ENT: Adjust
+005.188000
Zero's OFF
mm
Sen0
Sen1
LV
PEAK
LV
PEAK
FAR
PASS
Profiles that change sequentially as
the workpiece moves can be checked
through images with 3-D shading.
Profile Monitor
99.60ms
Sen 0
S+
←
/
→
: Display S+ENT: Adjust
+005.188000
mm
1div
V: 0.1250[mm]
T: 0.996 [s]
PASS
Thru
This window is a conceptualization and not an actual window.
Menu selections include items for measuring heights, 2- or 3-pt
steps, edge positions, widths, edge centers, peaks/bottoms, cross-
sectional areas, inclinations, average roughness, and maximum
roughness. There are also menu items for user-defined continuous
measurements (unrestricted calculations), trigger measurements,
and logging measurements.
Height of measurement range: 60 mm, width of measurement range:
70 mm
F502-EN2-04.book Seite 57 Dienstag, 26. Juli 2005 5:48 17
