Omron YRCX Series, Руководство по эксплуатации

Страница: 176 / 266

5
Contr
oller system settings
5-10
9. Generation
The system generation of the controller has been set at shipment corresponding to the specification of robot
to be connected and axis. So, the system generation setting by the customer is not needed.
If the system generation related memory is corrupted by serious trouble or if the robot or axis to be connected
to the controller is changed, the system generation setting is needed.
For details about how to operate the system generation, contact your distributor.
CAUTION
• If the system generation is changed by mistake, this may adversely affect the robot operation or cause serious
hazard to the operator. When the system generation needs to be changed, contact your distributor.
• If the system generation is changed without consulting your distributor, OMRON shall not be held responsible for
any trouble arising from this change.