Omron YRCX Series, Руководство по эксплуатации

Страница: 100 / 266

4
Edit
4-14
Step 1
Display the sequence compile
pop-up screen.
Press the F3 key (SEQ CMP) on
the "PROGRAM EDIT" screen (Edit Program
Edit Edit) to display the pop-up screen.
Executing the sequence compile
Step 2
Step 2
Execute the sequence compile.
Select [OK] and press the ENTER key. The
sequence compile is executed and "s" is
shown in FLAG on the "PROGRAM SELECTION"
screen.
Select [CANCEL] and press the ENTER key or
press the ESC key to cancel the sequence
compile and return to the "PROGRAM
SELECTION" screen.
CAUTION
The program name of the sequence program needs to be "SEQUENCE". If the program name is not "SEQUENCE",
the sequence compile cannot be executed.
2.5 Setting a main program
The program you have selected is set for the main program.
Step 1
Display the main program setting
pop-up screen.
Press the F4 key (MAIN) on the "PROGRAM
SELECTION" screen (Edit Program Edit) to
display the pop-up screen.
Setting for the main program
Step 2
Step 2
Set the program for the main
program.
Select [OK] and press the ENTER key.
The selected program is set for the main
program and "m" is shown in FLAG on the
"PROGRAM SELECTION" screen.
Select [CANCEL] and press the ENTER key or
press the ESC key to cancel setting the
program for the main program and return to
the "PROGRAM SELECTION" screen.
2.6 Changing a program attribute
It can be prohibited to edit or delete the registered program by specifying the program attribute on the "PROGRAM
SELECTION" screen (Edit Program Edit).
There are three kinds of program attributes as described below.
1. RW (read or write)
The program can be edited or deleted.
This attribute is automatically specified when the program name is registered.
2. RO (read only)
The program cannot be edited or deleted.
3. H (hide)
The program cannot be edited or deleted. Program contents cannot also be seen.
To change the program attribute, follow the Steps below. Note that the program attribute can be changed only
when the access level is the "maintainer level".