Omron WS02-CFSC1-E, Руководство по эксплуатации

Страница: 62 / 87

47
Starting and Stopping the Timing Chart Section 4-5
4-5 Starting and Stopping the Timing Chart
This section describes how to start and stop timing chart simulations.
To start timing chart simulations, the logic program must be stopped.
When the timing chart simulation is being executed, the input tags and output
tags that are displayed in the logic window will not be updated. The display will
be updated when the simulation is paused.
The display in the Watch Window will be updated regardless of whether the
timing chart simulation is executing or has stopped.
Starting the Timing Chart
1,2,3... 1. Select Timing Chart - Execute 1 Pulse , or click the Icon on the Timing
Chart Tool Bar.
The timing chart simulation will be started.
Pulse Execute on the
Timing Chart
1,2,3... 1. Select Timing Chart - Execute 1 Pulse , or click the Icon on the Timing
Chart Tool Bar.
The timing chart simulation will be executed for one pulse.
When it has finished, simulation will be paused.
Stopping the Timing Chart
1,2,3... 1. Select Timing Chart - Stop , or click the Icon on the Timing Chart Tool
Bar.
The timing chart simulation will be stopped.
When the timing chart simulation is stopped, the input tags displayed in the
Logic Window and Watch Window will be set to their initial values.
Pausing the Timing Chart
1,2,3... 1. Select Timing Chart - Pause , or click the Icon on the Timing Chart
Tool Bar.
The timing chart simulation will be paused.
Note Breakpoints and an I/O breakpoint can be set in the timing chart. Refer to 4-9
Breakpoints and 4-10 I/O Breakpoint on for details on setting breakpoints.