![background image](http://html1.mh-extra.com/html/omron/ws02-cfsc1-e/ws02-cfsc1-e_operation-manual_744143030.webp)
15
Simulation Procedure
Section 2-7
2-7
Simulation Procedure
Use the following procedure to simulate execution of a safety logic program.
Create a logic program using the logic editor in the Network Configurator.
Open the simulation file (.smr) in the NE1A Logic Simulator or import the program.
Create a simulation file (.smr) using the Network Configurator.
Execute the simulation in the NE1A Logic Simulator.
1. Create a Logic Program
3. Read in the File
2. Create a Simulation File
4. Execute the Simulation
….Refer to
….Refer to
SECTION 3 Debugging with the Logic Window
.
….Refer to
DeviceNet Safety System Configuration Manual
(Cat. No. Z905).
Содержание WS02-CFSC1-E
