Omron V780 Series, Руководство пользователя

Страница: 66 / 398

4 Installation and Connections
4 - 6 UHF RFID System V780-series Reader/Writer User’s Manual (Z389)
4-2 Connections and Wiring
Connect a power supply that meets the following conditions to the Reader/Writer.
1
Hold onto the connector on the Power
Cable and insert it into the power connec-
tor on the Reader/Writer.
Precautions for Correct Use
Do not apply more than 30 N of force to the connector on the Reader/Writer.
2
Turn the connector on the Power Cable clockwise
to lock it in place.
• For the Recommended Cable
Turn the cable connector clockwise until you
hear it securely lock in place.
• For Other Cables
Observe the tightening torque specifications for
the cable connectors.
4-2-1 Connecting and Removing the Reader/Writer Power Cable and
Ethernet Cable
Power Supply
Item Condition
Supply voltage 24 VDC
−
15% to +10%
Output current 500 mA min.
Safety standard SELV (Safety Extra Low Voltage)
Connecting Method
Pin No. Name Description I/O
1 24P +24 V ---
2 CONT
Control signal (operating
mode signal)
*1. Run Mode: Connect
to +24 V and then
start the
Reader/Writer.
Safe Mode: Connect
to 0 V and then start
the Reader/Writer.
IN
3 24N 0 V ---
4 --- --- ---
Reader/Writer Power Connector
Connector on Power Supply Cable