Omron V670-CF01 Скачать руководство пользователя страница 84

Страница: 84 / 92

SEC

tic

d on Ope

tin

Cond

ions

Electromagnetic Inductive RFID System

User's Manual

SECTION 6
Appendices

Chemical Resistance of Tags

Chemicals that affect Tags are shown below.

ABS resin is used for case material and epoxy resin for filling material. Refer the following lists and do

not use chemicals that effect ABS and epoxy resin. Use only chemicals that do not effect these resins.

Tags cannot be used in applications with explosion-proof specifications.

The above results are from tests conducted at room temperature (23

C). Even if the chemicals do not affect the ABS or

epoxy resins at room temperature, they may affect the resins at higher or lower temperatures. Always contact the man-

ufacturer of the chemicals and check the chemicals carefully in advance.

Chemicals That Cause Deformations, Cracks, etc.

ABS resin

Epoxy resin

Trichlene, acetone, xylene, toluene, gasoline, creosol,

methylene chloride, phenol, microhexanone, aqua regia,

chromic acid, sulfur (90% RT), methyl ethyl ketone, aniline,
nitrobenzene, monochlorobenzene, pyridine, nitric acid (60%

RT), and formic acid (80% RT)

Aqua regia, chromic acid, sulfuric acid (90% RT), nitric acid

(60% RT), liquid ammonia, acetone, methylene chloride,

phenol, and trichlene.

Chemicals That May Cause Discoloration, Swelling, etc.

ABS resin

Epoxy resin

Hydrochloric acid, alcohol, freon, sodium hydroxide, hydrogen

peroxide, benzine, sulfuric acid (10% RT), nitric acid (10%
RT), phosphoric acid (85% RT), liquid ammonia

Sulfuric acid (10% RT), nitric acid (10% RT), hydrochloric acid

(30% RT), acetic acid (50% RT), nitric acid, calcium hydroxide,
benzene, creosol, alcohol, microhexanone, toluene, xylene,

benzine, and grease.

Chemicals That Do Not Affect ABS Resin or Epoxy Resin

ABS resin

Epoxy resin

Ammonia, kerosene, mineral oil, developer, YUSHIROKEN
S50, CHEMICOOL Z, VELOCITY NO. 3, YUSHIROKEN EEE-

30Y, petroleum, grease, acetic acid, nitric acid, calcium

hydroxide, phosphoric acid (30% RT), hydrochloric acid (10%
RT), and potassium hydroxide.

Ammonia, hydrochloric acid (10% RT)), potassium hydroxide,
petroleum, gasoline, YUSHIROKEN S50, CHEMICOOL Z,

VELOCITY NO. 3, and YUSHIROKEN EEE-30Y.

Содержание V670-CF01





























































































Результаты поиска

Содержание V670-CF01

Отзывы:

Omron V670-CF01, Руководство пользователя, Страница: 84 / 92

Результаты поиска

Содержание V670-CF01

Отзывы: