Omron V670-CF01 Скачать руководство пользователя страница 18

Страница: 18 / 92

CTI

N 2

Conne

tion

Electromagnetic Inductive RFID System

User's Manual

SECTION 2
Communications Preparations

Connection

Turn OFF the power supply to the Handy Terminal.

Always turn OFF the power supply to the Handy Terminal before connecting or disconnecting the CF Reader/Writer. For

Handy Terminal operating procedures, refer to the operating instructions provided by the manufacturer.

Attach the Protective Cover to the end of the Handy Terminal.

Refer to

Protective Covers

for the attachment method for the Protective Cover.

p.21

Protective Covers

Insert the CF Reader/Writer into the Handy Terminal CF card slot.

Insert the CF Reader/Writer into the CF card slot as shown above. Insert it completely to the back of the CF card slot.

After the CF Reader/Writer has been inserted, turn ON the power supply to the Handy Terminal.

The indicator on the CF Reader/Writer will flash after the Handy Terminal power has been turned ON.

Содержание V670-CF01





























































































Результаты поиска

Содержание V670-CF01

Отзывы:

Omron V670-CF01, Руководство пользователя, Страница: 18 / 92

Результаты поиска

Содержание V670-CF01

Отзывы: