Omron V530-R2000, Руководство пользователя

Страница: 59 / 153

42
SECTION 5
Se
tt
in
g C
o
m
m
u
n
ic
a
tions
Conditions
V530-R2000
User’s Manual
SECTION 5
System Settings
Setting Communications Conditions
The conditions for communicating between the Controller and the host can be set.
Make these settings according to the communications specifications of the host.
l
System Set./Com Condition
1.
Make the settings for each item.
2.
Select OK .
Baud rates over 20 kbps are not defined for the RS-232C standard. Depending on the cable length,
communications may not be stable if 38400 bps or higher is set. If there are problems, set the baud
rate to 19200 bps or lower.
Use the following settings when executing a Backup, Upload, or similar command (CB, CU, etc.)
Item Selections Description
Baud Rate 2400 bps, 4800 bps, 9600 bps,
19200 bps, 38400 bps (default),
57600 bps, 115200 bps
Make these settings according to the communica-
tions specifications of the host.
Data Length 7bit, 8bit (default)
Parity Bit None (default), Odd, Even
Stop Bit 1 bit (default), 2 bit
Item Setting
Data length 8 bits
Parity None
Stop bits 1 bit
Com Condition
Baud Rate : 38400bps
Data Length : 8bit
Parity Bit : None
Stop Bit : 1bit
Cancel OK