Omron V530-R2000, Руководство пользователя

Страница: 114 / 153

97
V530-R2000
User’s Manual
SECTION 8
Troubleshooting
E
rr
o
r M
ess
ag
es
an
d
Co
rr
ect
io
n
s
SECTI
O
N
8
Error Messages and Corrections
The following table lists the error codes displayed on the screen and measures to take when
reading fails. The error codes are listed in numerical order.
Troubleshooting
Connection Errors
Error code Message displayed on screen Measure to take
E100
2D code is not found There may not be a 2D code in the field of vision. Check the
positioning and mark and be sure they are correct.
E200 2D code is not distinguished The background may be not be consistent, making it impossible
to find the 2D code. Check the surface of the workpiece and the
condition of the lighting.
E300
Decode error The cells of the 2D code cannot be discerned. Check the condi-
tion of the mark and the lighting, and then try teaching again.
E400 Timeout Reading was not completed within the set time. Check the sur-
face of the workpiece and the condition of the lighting, and then
try teaching again.
Increase the setting of the Read Timeout setting.
Status Measure to take Reference
The POWER indicator is not
lit.
• The power supply is not connected properly. p. 15
The Video Monitor image is
not clear. • The Monitor Cable is not connected properly. p. 13
Cannot make key inputs on
the Console.
• The Console Cable is not correctly connected. p. 13
Camera images are not dis-
played when using a Camera
and CCTV Lens.
• The lens cap is on the lens.
• The Camera Cable is not properly connected.
-
p. 13
Camera images are not dis-
played when using a Reading
Head.
• The Cable is not connected.
• The correct Reading Head is not selected for the Camera Use Type
setting under System Set./Camera/Lighting .
p. 13
p. 45
The code is not displayed on
the screen. • Press the ESC Key on the Console to switch to a live image, or move
to Teaching Mode and check the image.
p. 24
p. 28
The menu is not displayed. • Press the ENT Key on the Console. p. 25