Omron V530-R2000, Руководство пользователя

Страница: 54 / 153

37
V530-R2000
User’s Manual
SECTION 4
Us
ing Ana
ly
tic
a
l Func
tions
SECTION 4
Setting Read Conditions
Condition Watcher
The Condition Watcher monitors transitions in continuous reading. If the monitor level
falls, and alarm signal is output so that decreases in the ability to read can be detected
in advance.
No. Display item Description
1 Appraisal item Select the appraisal item to display on the screen.
The display will change as follows then the Up/Down Keys are pressed:
Light, Focus, Mark, Locate, None.
Meaning of Appraisal Items p.36
2 Point Displays the quality points of the appraisal item selected at (1).
3 Graph Displays the transitions in the total points for the most recent 1,000 readings.
The most recent readings are displayed on the right. The graph scrolls left.
4 Accumulative reading
information Displays the totals of the results of reading.
Total: Number of readings, OK: Number of successful readings
Alarm: Number of alarms, NG: Number of failures
5 Read status and com-
ment OK , NG , or ALM is displayed.
If ALM is displayed, a comment will be displayed to indicate the cause or
solution.
6 Read data Displays the data that was read.
7 Communications con-
tents Displays the contents of the last two communications with the host. The
most recent command is shown on top.
This information enables checking the serial interface and the communica-
tions status of the input terminals.
The following is displayed as the communications contents: “Trig-in” indi-
cates a trigger from the input terminal and “Trig-con” indicates a trigger from
the Console. All other displays are commands.
Still
50
0
100
1000
500
OMRON2002
Condition Watcher
GL OMRON2002
GL OMRON2002
Total
OK
Alarm
NG 1635
1632
30
3
Light
Point 24
Make lighting brighter
ALM
1
6
5
7
2
3
4
C
R
C
R