Omron V430-F-series, Руководство пользователя

Страница: 350 / 404

Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
13-19
Utilities
Default/Reset/Save
Understanding and controlling your reader’s active, saved, and default settings is critical to
its successful operation.
Resets
Resets (“ A ” commands) affect only the current settings (active memory) and are not saved
for power-on.
Saved for Power-on
Power-on parameters (“ Z ” commands) are saved to NOVRAM and recalled and loaded
into current parameters when power is cycled to the reader or the <Arp> command is
issued.
Defaults
Defaults are Microscan firmware settings or saved customer settings that can be recalled,
either by software or hardware reset.
Function
Serial
Cmd
ESP (first, right-click in any
menu tree)
a
a. When you right-click in a menu tree and select Default Current Menu Settings or Default All ESP
Settings , it is important to note that only ESP settings are defaulted. To save these defaults to the
reader itself, you need to follow up with a Save to Reader, Send and Save command.
Re
sets
(n
ot sav
ed
fo
r po
wer
-on
)
Reset < A >
Save to Reader,
Send No Save
Reset and Recall Microscan Defaults < Ard > No
Reset and Recall Power-On Parameters < Arp > No
Reset and Recall Customer Default
Parameters
< Arc > No
Saved for
Power-on
Save Current Settings for Power-On < Z >
Save to Reader,
Send and Save
Save Current Settings as Customer
Default Parameters for Power-On
< Zc >
Save to Reader,
Send and Save Customer
Defaults for Power-On
b
b. Only available in ESP if enabled under the Options dropdown menu.
Recall Microscan Default Parameters and
Save for Power-On
< Zrd > No
Recall Customer Default Parameters and
Save for Power-On
< Zrc > No