Omron Sysmac NY512-1300, Руководство пользователя

Страница: 389 / 460

A-3
Appendices
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
A-2 U
se th
e Sysmac
S
tudio
to
Set t
h
e T
ag Da
ta
L
inks (
E
th
er
N
et/IP Co
nn
ectio
ns)
A
A-2-1
Overview of
the T
ag
Dat
a
Links
(EtherNet/IP C
onnections) Settings with
the Sysmac
S
tudio
A-2 Use the Sysmac Studio to Set the Tag
Data Links (EtherNet/IP Connections)
You can use the Sysmac Studio to set the settings required for creating tag data links (EtherNet/IP con-
nections)
*1
between NY-series Controllers.
*1 The tag data links and EtherNet/IP connections enable cyclic tag data exchanges on an EtherNet/IP network
between Controllers or between Controllers and other devices. Here, "EtherNet/IP connection" refers to both
the tag data links and the EtherNet/IP connections.
If an NY-series Controller operates as the originator device, you can use the Sysmac Studio to set the
originator device settings for the EtherNet/IP connections.
Similarly, if an NY-series Controller operates as the target device, you can use the Sysmac Studio to set
the tags and tag sets of the target device.
A-2-1 Overview of the Tag Data Links (EtherNet/IP Connections)
Settings with the Sysmac Studio
Acceptable System Configuration Conditions for Setting the
EtherNet/IP Connection Settings on the Sysmac Studio
Settings not required.
Setting only with the Network
Configurator is possible.
Setting with the Sysmac
Studio is possible.
Tag and tag set settings
Tag and tag set settings
Tag and tag set settings
CS-/CJ-series PLC
FH/FZ/FQ/ZW-series Sensor
or another similar unit
(Controller built-in EtherNet/IP port
or EtherNet/IP Unit)
Tag and tag set settings Connection settings
Setting with the Sysmac
Studio is possible.
Setting with the Sysmac
Studio is possible.
Settings for the target device
Settings for the originator device
NJ-series Controller
NY-series Controller
NX-series Controller
(Built-in
EtherNet/IP port)
(Two built-in
EtherNet/IP ports)