Omron Sysmac NY512-1300, Руководство пользователя

Страница: 308 / 460

10 FTP Server
10-18 NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
10-7 Application Example from a Host
Computer
The following procedure provides an example of FTP operations from a host computer. In this example,
the following assumptions are made.
• The IP address of the built-in EtherNet/IP port is registered in the hosts as host name [nj].
• The FTP login name is “LogIn”.
• Manufacturing results is stored in the Virtual SD Memory Card in the NY-series Controller in a file that
is named RESULT.BIN.
• A processing instructions data file called PLAN.BIN already exists on the workstation.
In the following procedure, the manufacturing results file (RESULT.BIN) in the Virtual SD Memory Card
in the Controller is transferred to a workstation, and then a manufacturing instructions file (PLAN.BIN)
on the workstation is transferred to the Virtual SD Memory Card in the Controller. Underlined text is
keyed in from the FTP client. The workstation prompt is indicated as $ and the cursor is indicated as
 .
1
Start the FTP application and connect to the built-in EtherNet/IP port.
2
Enter the login name.
3
Make sure the Virtual SD Memory Card settings are correctly made. The MEMCARD1 directory
is displayed if the Virtual SD Memory Card settings are correctly made.
4
Change to the MEMCARD1 directory.
5
Change data type to binary.
$ ftp nj
connected to nj
220 **IPaddress** NY512-1300 FTP server(FTP**version**)ready
Name(nj:root):
FTP started.
Enter the password.
Enter the login name.
Name(nj:root):LogIn
331 Password required for LogIn.
Password:
230 LogIn logged in.
ftp>
Make sure the
Virtual SD Memory Card
settings are correctly
made. ftp> ls
200 PORT command successful.
150 opening data connection for ls(**IPaddress**port#**)(0 bytes).
MEMCARD1
226 Transfer complete.
15 bytes received in 0 seconds(**bytes/s)
ftp>
ftp> cd MEMCARD1
250 CWD command successful.
ftp>
Change the directory.
ftp> type binary
200 Type set to I.
ftp>
Set binary data type.