Omron Sysmac NY512-1300, Руководство пользователя

Страница: 137 / 460

7-21
7 Tag Data Link Functions
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
7-
2 S
e
tti
ng
T
ag
Da
ta
Li
n
ks
7
7-2
-4 Cr
eating T
a
gs an
d T
ag
S
e
ts
You must create the tag sets and set member tags required to create connections for a registered Eth-
erNet/IP Unit. You can set the network variables used in control programs for tags.
This section first describes the basic procedure to create tags and tag sets (1, below). Then it explains
how to import variables with a Network Publish attribute from the Sysmac Studio to the Network Config-
urator (2, below).
Then it explains how to effectively use network variables for tags.
(1) Creating Tags and Tag Sets with the Network Configurator’s Device Parameter Edit-
ing Function
(2) Importing Variables with a Network Publish Attribute Created in the Sysmac Studio
to the Network Configurator
 Creating a Tag Set
1
Double-click the icon of the device for which to create a tag set, or right-click the icon to display
the pop-up menu and select
Parameter − Edit .
The Edit Device Parameters Dialog Box is displayed.
7-2-4 Creating Tags and Tag Sets
(1) Creating Tags and Tag Sets with the Network Configurator’s
Device Parameter Editing Function