Omron SYSMAC CP Series, Руководство пользователя

Страница: 366 / 578

15 Ethernet
15-36
CP2E CPU Unit Software User’s Manual(W614)
15-5 Socket Services
The socket services allow devices on the Ethernet to send and receive various data using either the
UDP or TCP protocol.
The way to use socket services is to set the required parameters in the parameter area allocated in the
DM Area, and then to request particular UDP or TCP socket services by turning ON dedicated control
bits in the AR Area. When the PLC has completed the requested process, the same bit is turned OFF to
provide notification. Data that is sent or received is automatically handled according to the I/O memory
locations specified in the parameter area.
A total of three ports (UDP and TCP combined) can be used for socket services.
15-5-1 Overview of Socket Service
15-5-2 Procedure for Using Socket Service Functions
Ethernet
S ervice re qu e s t s witch
P a r a meter s
UNIX comp u ter, etc.
(node with s ocket
s ervice s interf a ce)
CP2E-N -type
CPU Unit
TCP/UDP
protocol
TCP/UDP
protocol
IP
TCP
UDP
S
ocket
1. M a ke the bas ic s etting s .
Refer to 15-3-3
Basic Settings
.
2. U s e the CX-Progr a mmer or Progr a mming Con s ole to m a ke the s ocket
s ervice s etting s in the s ocket s ervice p a r a meter a re as 1 to 3 (m+8 to m+37)
a lloc a ted in the DM Are a .
Note The fir s t word m in the a lloc a ted DM Are a = D16000
3.
S elect Tran s fer to PLC from the Option s Men u , a nd then click the Ye s
bu tton. The S et u p d a t a in the a lloc a ted DM Are a will b e tr a n s ferred to the
CPU Unit.