Omron SYSMAC CJ1W-SCU21-V1, Руководство по эксплуатации

Страница: 609 / 781

580
ES100
@
Digital Controller Protocol Appendix K
Write PID Control Parameters 2 (Sequence No. 263 (Hex 0107))
Writes the PID parameters No. 5 to 8 to the PID control parameters in the parameter area.
Send Data Word Allocation (3rd Operand of PMCR(260))
+0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10
+11
+12
+13
+14
+15
+52
+53
+54
+55
+56
+57
PID No. 5 P
~ ~
(rightmost 4 digits)
PID No. 8 MV upper limit
PID No. 8 MV upper limit
PID No. 8 Automatic selection range upper limit
PID No. 8 Automatic selection range upper limit
PID No. 8 PV bias value
PID No. 8 PV bias value
PID No. 5 P (leftmost 4 digits)
PID No. 5 I (rightmost 4 digits)
PID No. 5 I (leftmost 4 digits)
PID No. 5 D (rightmost 4 digits)
PID No. 5 D (leftmost 4 digits)
PID No. 5 MV lower limit (rightmost 4 digits)
PID No. 5 MV lower limit (leftmost 4 digits)
PID No. 5 MV upper limit (rightmost 4 digits)
PID No. 5 MV upper limit (leftmost 4 digits)
PID No. 5 PV bias value (rightmost 4 digits)
PID No. 5 PV bias value (leftmost 4 digits)
PID No. 5 Automatic selection range upper limit (rightmost 4 digits)
PID No. 5 Automatic selection range upper limit (leftmost 4 digits)
(rightmost 4 digits)
(leftmost 4 digits)
(rightmost 4 digits)
(leftmost 4 digits)
(rightmost 4 digits)
(leftmost 4 digits)
First word of
send data Number of send data words
(Undefined) Unit No.