Omron SYSDRIVE 3G3MX-A2002, Руководство пользователя

Страница: 131 / 254

4-40
4-2 Function Mode
4
Func
tions
RDY (Ready) Function
This function prepares for Inverter output to rotate the motor immediately after a RUN command is
input.
• When this function is enabled, the RUN (during RUN) LED indicator is always lit, since the Inverter
is in output status even though the motor stops.
• Allocate '52 (operation ready)' to any of multi-function inputs C001 to C006, or set b151 to '01'.
Refer to the table below for the correlation when the multi-function input '52' and b151 are set
simultaneously.
• When this function is enabled, data other than the parameters changeable during operation cannot
be changed.
<Group C: Multi-function Terminal Function>
The 3G3MX has six multi-function inputs [S1], [S2], [S3], [S4], [S5] and [S6]; two open collector out-
put terminals [P1], [P2]; two relay output terminals [MA] and [MB] (SPDT contact); and one analog
output terminal [AM].
Multi-function Input Selection
• You can allocate the following functions to any of multi-function inputs S1 to S6 (C001 to C006,
C201 to C206) to operate the set function.
• You can select NO- or NC-contact input for each multi-function input S1 to S6.
Parameter No. Function name Data Default setting Unit
b151 Ready function selection
00: Disabled
01: Enabled
00

Multi-function input terminal "52"
OFF ON
b151 setting
00 OFF ON
01 ON ON