Omron SX-F, Инструкция по эксплуатации

Страница: 18 / 316

10
Dismantling and scrapping
Section 1-5
By using the optional “Extended EMC” filter the VSD fulfils requirements
according to category C2,
!Warning In a domestic environment this product may cause radio interference, in which
case it may be necessary to take adequate additional measures.
!Warning The standard VSD, complying with category C3, is not intended to be used on
a low-voltage public network which supplies domestic premises; radio
interference is expected if used in such a network. Contact your supplier if you
need additional measures.
1-5 Dismantling and scrapping
The enclosures of the drives are made from recyclable material as aluminium,
iron and plastic. Each drive contains a number of components demanding
special treatment, for example electrolytic capacitors. The circuit boards con-
tain small amounts of tin and lead. Any local or national regulations in force for
the disposal and recycling of these materials must be complied with.
Table 1 Standards
Market Standard Description
European
EMC Directive 2004/108/EEC
Low Voltage Directive 2006/95/EC
All
EN(IEC)61800-3:2004
Adjustable speed electrical power drive systems
Part 3: EMC requirements and specific test methods.
EMC Directive : Declaration of Conformity and
CE marking
EN(IEC)61800-5-1 Ed. 2.0
Adjustable speed electrical power drive systems Part 5-1.
Safety requirements - Electrical, thermal and energy.
Low Voltage Directive : Declaration of Conformity and
CE marking
IEC 60721-3-3
Classification of environmental conditions. Air quality chemical vapours, unit
in operation. Chemical gases 3C1, Solid particles 3S2.
Optional with coated boards
Unit in operation. Chemical gases Class 3C2, Solid particles 3S2.
UL508C Contact your Omron representative
USA
UL and UL

90 A only
UL 840
Contact your Omron representative
Russian GOST R Contact your Omron representative