Omron SX-F, Инструкция по эксплуатации

Страница: 137 / 316

129
Process and Application Parameters [300]
Section 11-3
Fig. 66 Ratio
F(Value), Process Min [327]
This function is used for scaling if no sensor is used. It offers you the possibil-
ity of increasing the process accuracy by scaling the process values. The pro-
cess values are scaled by linking them to known data in the VSD. With
F(Value), Proc Min [327] the precise value at which the entered Process Min
[324] is valid can be entered.
Note If Speed, Torque or Frequency is chosen in menu [321] Proc Source, menus
[322]- [328] are hidden.
Communication information
F(Value), Process Max [328]
This function is used for scaling if no sensor is used. It offers you the possibil-
ity of increasing the process accuracy by scaling the process values. The pro-
cess values are scaled by linking them to known data in the VSD. With
F(Value), Proc Max the precise value at which the entered Process Max [525]
is valid can be entered.
Ratio=Linear
Ratio=Quadratic
Process
Process
Process
Min Max
unit
Max
[325]
Min
[324]
Speed
[341]
Speed
Speed
[343]
Default: Min
Min -1 According to Min Speed setting in [341].
Max -2 According to Max Speed setting in [343].
0.000-10000
0-
1000
0
0.000-10000
327 F(Val) PrMin
Stp
Min
A
Modbus Instance no/
DeviceNet no:
43313
Profibus slot/index 169/217
EtherCAT index (hex) 4cf1
Fieldbus format Long, 1=1 rpm
Modbus format EInt