Omron Sti H-T40M-P, Инструкция по установке и эксплуатации, Страница: 13 / 21

O
P E R A T I O N
13
OMRON STI © 99885-0010 Rev.A
11 O
PERATION
11
Power up the G9SP and status display touchscreen. The
“Communicating” indicator should be blinking on the bottom of the
main page of the Status Display Touchscreen. If it is not, verify the
G9SP is powered up, has a program running, and the communication
cable is correctly connected. No programming in the G9SP is required
to view the safety inputs or safety outputs or their corresponding error
codes. To use the reset functions see Reset Function section.