16
SmartVision MX User's Guide
14362-000 Rev. D
3.3 Mounting the SmartVision MX
124.0
(4.9)
240.0
(9.5)
260
(10.2)
4.25
(0.17)
10.0
(0.39)
R4.0
(0.16)
Figure 3-1. Dimensions for Mounting (Units in mm)
Vertical Mounting
Vertical mounting against a cabinet wall using the four bottom tabs is the recommended
mounting method.
Use 6-32 UNC screws, or screws of similar specifications, for mounting the processor to a ver-
tical surface. The screw length is determined by the surface being mounted to.
Desk-top Mounting
Use 6-32 UNC screws, or screws of similar specifications, for mounting the processor to a flat
surface. The screw length is determined by the surface being mounted to.
Stack Mounting
The SmartVision MX industrial PC can be stack-mounted on top of a SmartController, if there
is one in the system, using two mounting brackets (14393-000) available as an option with the
industrial PC. Refer to Chapter 7: Options for more information.
Views of the bracket are shown in the following figure.
