185
Temperature Input Units
Section 6-4
The data format used for allocating data in the Master is shown below. Data is
allocated as two’s complements (4 bytes = 2 words).
Temperature Data 1/100
Display Mode
(Temperature Data (1/100))
This format is used to allocate temperature data in 1/100 Display Mode. The
data format used when allocated in the Master is shown below. The data is
given as two’s complements (8 bytes = 4 words).
Top/Valley Detection
Timing Flags (Shot Status)
These flags turn ON for the one-shot time when detecting the top or valley for
the top/valley hold function.
These flags are used to time reading the values held as the top and valley val-
ues at the Master. The following data format is used when these flags are
allocated in the Master (2 bytes = 1 word).
The details of each byte are shown in the following table.
Note
The one-shot time can be changed. For details, refer to the one-shot time set-
tings for the top/valley hold function.
Temperature Status Flags
(Temperature Status)
The Temperature Status Flags include allocations for the Comparator Result
Flag, the Top/Valley Detection Timing Flags, and the Off-wire Detection
Flags. These flags are used for detection and monitoring.
The data format used for each byte when these flags are allocated in the Mas-
ter is shown below (2 bytes = 1 word).
15
0
Temperature Data for Input 0
Temperature Data for Input 1
15
0
Temperature Data for Input 0
Temperature Data for Input 0
Temperature Data for Input 1
Temperature Data for Input 1
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
+0
0
0
0
0
0
0
V_ST1
V_ST0
+1
0
0
0
0
0
0
T_ST1
T_ST0
Byte
Abbreviation
Name
Details
+0
V_STx
Valley Detection Tim-
ing Flag
Turns ON when a valley is
detected by the valley hold
function and then turns OFF
after the one-shot time has
elapsed.
+1
T_STx
Top Detection Tim-
ing Flag
Turns ON when a top is
detected by the top hold func-
tion and then turns OFF after
the one-shot time has elapsed.
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
+0
BW0
T_ST0 V_ST0
HH0
H0
PS0
L0
LL0
Input
0
+1
BW1
T_ST1 V_ST1
HH1
H1
PS1
L1
LL1
Input
1
Содержание SMARTSLICE GRT1-DRT
