![background image](http://html1.mh-extra.com/html/omron/sentech-stc-cmb120apcl-series/sentech-stc-cmb120apcl-series_product-specifications-and-users-manual_744095035.webp)
No.14S056-11
35
STC-CMC120APCL, STC-CMB120APCL
Specifications and Users guide
6
The communication protocol specifications
This camera has the communication function that enables external devises like PC control the camera functions.
Please use “CLCtrl
2 (Version1.01 or later)” communication software or use following the communication protocol to
communicate to the camera.
Note.
The communication problem may occur under the following conditions:
1. When the external sync frequency is illegal (more than 1% off from the specified frequency).
2. When external sync is unstable (In another word the bad external sync signal).
3. About for one second after switching from/to external sync mode to/from internal sync mode.
4. About for one second after switching frame rate.
6.1 The communication method
UART (RS232C), Binary communication
6.2 The communication settings
Settings
Baud rate
9,600bps / 38,400bps /57,600bps / 115,200bps
Data bit
8bit
Parity
None
Stop bit
1bit
Flow control
None
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.