![background image](http://html1.mh-extra.com/html/omron/sentech-stc-cmb120apcl-series/sentech-stc-cmb120apcl-series_product-specifications-and-users-manual_744095034.webp)
No.14S056-11
34
STC-CMC120APCL, STC-CMB120APCL
Specifications and Users guide
5.3
Edge Preset Trigger mode
In this trigger mode, the camera exposure starts at the rising edge of the trigger pulse or negative edge when setting
is “Trigger Polarity::Negative”, the camera exposure starts at the falling edge of th
e trigger pulse.
Exposure duration time is preset by the “Electrical Shutter” settings.
.
5.3.1 Edge Preset Trigger mode
Note.1: The exposure time sets by the preset electronic shutter speed.
5.3.2
5.3.3 Edge Preset Trigger mode (Exposure timing)
Note.1: The trigger signal is removed by the filtering if the pulse width of the input trigger signal is less than 1.5us.
Please input the trigger signal has more than 1.5 us pulse width.
Note.2:
α
1(Exposure time offset) is.
10,8,4,2TAP
41[us] (Edge Preset and Variable at Line unit)
42[us] (Pulse Width and Variable at us unit)
3TAP
42[us] (Edge Preset and Variable at Line unit)
43[us] (Pulse Width and Variable at us unit)
Exposure
time
Internal VD
exposure
Trigger signal
(Rising edge)
Video out
*Note. 1
FVAL
Trigger signal
Exposure time
T1'
Exposure time: T1' = Preset electronic s α
1
Filtering *Note.1
1.5us
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.