Omron S8BA-24D24D480SBF, Руководство пользователя

Страница: 41 / 82

3 Installation and connection
3 - 8 S8BA-series Uninterruptible Power Supply (UPS) User’s Manual (U726)
1
Connect devices you want to back up to output terminals of this unit.
For details about connecting the cables to the terminal block, refer to 3-2-5 Connecting a cable
to the battery terminal block, input terminal block and output terminal block on page 3-9.
2
When using the UPS monitoring software or the I/O signal, connect the unit to the target device
with a connection cable.
For details on the connection method, refer to Section 6 To perform shutdown processing of the
devices when a power failure occurs and Section 7 Using the I/O signal functions .
1
Connect an input cable to the input terminal block of the unit.
For details about connecting the cables to the terminal block, refer to 3-2-5 Connecting a cable
to the battery terminal block, input terminal block and output terminal block on page 3-9.
2
Connect the input cable to the DC power supply device.
When you turn ON the input power supply, the power output operation starts, and at the same
time, battery charging operations starts, and the battery will be completely charged in about 8
hours.
3-2-3 Connecting a device to the output terminal block
3-2-4 Connecting the input power supply to the input terminal block
DC power supply device
(24 VDC)
Connected device UPS
DC power supply device
(24 VDC)
Connected device UPS