Omron R88D-1SN01H-ECT, Руководство пользователя

Страница: 63 / 828

1 - 19
1 Features and System Configuration
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
1-5 A
ppli
cable S
tand
ar
d
s
1
1
-5-2
UL and cUL S
tandar
ds
The 1S-series Servomotors, Servo Drives, and Footprint-type Noise Filters conform to the following
standards.
The Servo Drives and Servomotors comply with UL 61800-5-1 as long as the following installation con-
ditions (a) and (b) are met.
(a) Use the Servo Drive in pollution degree 2 or 1 environment as specified in IEC 60664-1.
Example: Installation inside an IP54 control panel.
(b) Be sure to connect a fuse, which is a UL-listed product with LISTED and mark, between the
power supply and noise filter.
Select the fuse from the following table.
Use copper wiring with a temperature rating of 75°C or higher.
1-5-2 UL and cUL Standards
Standard Product Applicable standards File number
UL standards Servo Drives UL 61800-5-1 E179149
Servomotors UL 1004-1, UL 1004-6 E331224
Footprint-type Noise Filters UL1283 E191135
CSA standards
*1
*1. IN CANADA, TRANSIENT SURGE SUPPRESSION SHALL BE INSTALLED ON THE LINE SIDE OF THIS
EQUIPMENT AND SHALL BE RATED 277 V (PHASE TO GROUND), SUITABLE FOR OVERVOLTAGE
CATEGORY III, AND SHALL PROVIDE PROTECTION FOR A RATED IMPULSE WITHSTAND VOLTAGE
PEAK OF 6 KV
Servo Drives CSA C22.2 No. 274 E179149
Servomotors CSA C22.2 No. 100 E331224
Servo Drive model Fuse
R88D-1SN01L-ECT UL CLASS RK5 15 A
R88D-1SN02L-ECT UL CLASS RK5 15 A
R88D-1SN04L-ECT UL CLASS RK5 15 A
R88D-1SN01H-ECT UL CLASS RK5 15 A
R88D-1SN02H-ECT UL CLASS RK5 15 A
R88D-1SN04H-ECT UL CLASS RK5 15 A
R88D-1SN08H-ECT UL CLASS RK5 15 A
R88D-1SN10H-ECT UL CLASS RK5 15 A
R88D-1SN15H-ECT UL CLASS RK5 40 A
R88D-1SN20H-ECT UL CLASS RK5 40 A
R88D-1SN30H-ECT UL CLASS RK5 40 A
R88D-1SN06F-ECT UL CLASS RK5 20 A
R88D-1SN10F-ECT UL CLASS RK5 20 A
R88D-1SN15F-ECT UL CLASS RK5 20 A
R88D-1SN20F-ECT UL CLASS RK5 20 A
R88D-1SN30F-ECT UL CLASS RK5 20 A