Omron R6YXC1000, Руководство пользователя, Страница: 195 / 260

A
Troubleshooting
A-13
2.705 : System error (OPTION)
Code : &H0002&H02C1
Meaning/Cause Error occurred in software.
Action Contact your distributor.
2.706 : System error (PATH)
Code : &H0002&H02C2
Meaning/Cause Error occurred in software.
Action Contact your distributor.
2.707 : AXSWEI over
Code : &H0002&H02C3
Meaning/Cause The axis weight exceeds the input range.
Action Set the axis weight within the input range.
2.708 : System error (Tracking)
Code : &H0002&H02C4
Meaning/Cause Error occurred in software.
Action Contact your distributor.
[ 3] Alarm related to the program file operation
3.201 : Too many programs
Code : &H0003 &H00C9
Meaning/Cause A new program was created over 100 programs.
Action Create a new program after deleting an unnecessary program. (Make a backup if necessary.)
3.202 : Program already exists
Code : &H0003 &H00CA
Meaning/Cause A program with the same name of a registered program was created, copied, or renamed.
Action Use a different program name to create, copy, or rename.
3.203 : Program doesn't exist
Code : &H0003 &H00CB
Meaning/Cause A registered program of the specified name does not exist.
Action Input a program name that is registered.
3.204 : Writing prohibited
Code : &H0003 &H00CC
Meaning/Cause The specified program is write-protected.
Action Make the program not write-protected.