Omron Q2V Series, Техническое руководство

Страница: 708 / 734

12.10 o: KEYPAD
708 SIEPCYEUOQ2V01A Q2V Technical Manual
■
o4-11: Flt.History Initialization
No.
(Hex.)
Name Description
Default
(Range)
o4-11
(0510)
Flt.History Initialization
Resets the records of Monitors U2: FAULT and U3: FAULT HISTORY .
0
(0, 1)
Note:
When you initialize the drive with A1-03 [Init Parameters] , the drive will not reset the records for U2-xx and U3-xx .
0 : No Reset
Keeps the records of Monitors U2-xx and U3-xx .
1 : Reset
Resets the records for Monitors U2-xx and U3-xx . After the reset, the drive automatically resets o4-11 to 0 .
■
o4-12: kWh Monitor Initialization
No.
(Hex.)
Name Description
Default
(Range)
o4-12
(0512)
kWh Monitor Initialization
Resets the monitor values for U4-10 [kWh Lower 4Digits] and U4-11 [kWh Upper 5Digits] .
0
(0, 1)
Note:
When you initialize the drive with A1-03 [Init Parameters] , the drive will not reset U4-10 and U4-11 .
0 : No Reset
Keeps the monitor values for U4-10 and U4-11 .
1 : Reset
Resets the values of U4-10 and U4-11 . After the reset, the drive automatically resets o4-12 to 0 .
■
o4-13: NumOfRunCom Init Counter
No.
(Hex.)
Name Description
Default
(Range)
o4-13
(0528)
NumOfRunCom Init
Counter
Resets the monitor values for U4-02 [Num of Run Commands] , U4-24 [No of Travels(L)] , and
U4-25 [No of Travels(H)] .
0
(0, 1)
0 : No Reset
Keeps the monitor values for U4-02 , U4-24, and U4-25 .
1 : Reset
Resets the values of U4-02 , U4-24 , and U4-25 . After the reset, the drive automatically resets o4-13 to 0 .
■
o4-22: Time Format
No.
(Hex.)
Name Description
Default
(Range)
o4-22
(154F)
RUN
Time Format
Sets the time display format. This parameter is only available when using an LCD keypad.
0
(0 - 2)
Sets the display of the time shown in the upper-left of the LCD keypad screen.
0 : 24 Hour Clock
1 : 12 Hour Clock
2 : 12 Hour JP Clock
■
o4-23: Date Format
No.
(Hex.)
Name Description
Default
(Range)
o4-23
(1550)
RUN
Date Format
Sets the date display format. This parameter is only available when using an LCD keypad.
0
(0 - 2)
Sets the date format that the drive uses for the fault history and other records.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV