Omron Q2V Series, Техническое руководство

Страница: 697 / 734

Parameter
Details
12
12.10 o: KEYPAD
SIEPCYEUOQ2V01A Q2V Technical Manual 697
■
o1-05: LCD Contrast Adjustment
No.
(Hex.)
Name Description
Default
(Range)
o1-05
(0504)
RUN
LCD Contrast Adjustment
Sets the contrast of the LCD display on the keypad.
5
(0 - 10)
When you decrease the setting value, the contrast of the LCD display decreases. When you increase the setting
value, the contrast increases.
■
o1-10: FrqDisplay Max Value
No.
(Hex.)
Name Description
Default
(Range)
o1-10
(0520)
FrqDisplay Max Value
Sets the value that the drive shows as the maximum output frequency.
Determined by o1-03
(1 - 60000)
To display a maximum output frequency of 100.00, set parameters to these values:
• o1-10 = 10000
• o1-11 = 2 [FrqDisplay Decimal Places = (XXX.XX) 2 Decimal Places]
Note:
Set o1-03 = 3 [FrqDisplay Unit Selection = User-selected units] before you set o1-10 and o1-11 .
■
o1-11: FrqDisplay Decimal Places
No.
(Hex.)
Name Description
Default
(Range)
o1-11
(0521)
FrqDisplay Decimal Places
Sets the number of decimal places for frequency reference and monitor values.
Determined by o1-03
(0 - 3)
0 : (XXXXX) No Decimal Places
1 : (XXXX.X) 1 Decimal Place
2 : (XXX.XX) 2 Decimal Places
3 : (XX.XXX) 3 Decimal Places
Note:
Set o1-03 = 3 [FrqDisplay Unit Selection = User-selected units] before you set o1-10 [FrqDisplay Max Value] and o1-11 .
■
o1-24 to o1-35: Cust.Monitor 1 to 12
No.
(Hex.)
Name Description
Default
(Range)
o1-24 to o1-35:
(11AD - 11B8)
RUN
Cust.Monitor 1 to 12
Sets a maximum of 12 monitors as user monitors. This parameter is only available when using an
LCD keypad.
o1-24: 101
o1-25: 102
o1-26: 103
o1-27 to o1-35: 0
(0, 101 - 999)
These parameters save the monitor items selected by the LCD keypad [Custom Monitor].
Note:
•
You can show a maximum of three selected monitors on one LCD keypad screen.
–
When you select only one monitor, the text size of this monitor increases. For example, when o1-25 to o1-35 = 0 , the text size of the
monitor saved in o1-24 increases.
– When you select two monitors, the text size of these monitors increase.
– When you select four or more monitors, the fourth monitor and all additional monitors are shown on the next screens.
•
Monitors selected with o1-24 to o1-26 can be displayed as a bar graph, analog gauge, or trend plot.
– Bar graph display: 3 monitors maximum
Select with o1-24 , o1-25 , and o1-26 .
–
Analog gauge display: 1 monitor
Select with o1-24 .
–
Trend plot display: 2 monitors
Select with o1-24 and o1-25 .
• You can only set parameters o1-24 to o1-26 with analog output monitors.
• You can set all monitors to parameters o1-27 to o1-35 .
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV