Omron PROFINET NX-PNC202, Руководство пользователя

Страница: 236 / 282

12 Troubleshooting
12 - 12
NX-series PROFINET Coupler Unit User’s Manual (W623)
35010000
hex
Unit Config-
uration Veri-
fication
Error
There is an
inconsistency
between the Unit
configuration
information in the
Communications
Coupler Unit and
the Units that are
actually con-
nected. Or, the
Unit configura-
tion was changed
during operation
while the Unit
configuration
information was
not set in the
Communications
Coupler Unit.
• An NX Unit that is regis-
tered in the Unit configura-
tion information is not
connected.
• A connected NX Unit does
not agree with the NX Unit
that is registered in the Unit
configuration information.
• An NX Unit that is not regis-
tered in the Unit configura-
tion information is
connected.
• A mounted Unit is disabled
in the NX Unit Mounting
Setting for the Unit configu-
ration information.
• An NX Unit became discon-
nected during operation.
• An NX Unit was connected
during operation.
• The serial number of a Unit
that is registered in the Unit
configuration information
does not agree with the
serial number of the Unit
that is connected. (The
Serial Number Check
Method is set to
Setting =
Actual device .)
• The version of a Unit that is
registered in the Unit con-
figuration information is
newer than the version of
the Unit that is connected.
• The power supply to an
Additional NX Unit Power
Supply Unit is not turned
ON.
 P. 12-21
40200000
hex
NX Unit
Processing
Error
A fatal error
occurred in an
NX Unit.
• An error occurred in the
software.
 P. 12-24
84C00000
hex
NX Unit
Communi-
cations Tim-
eout
An error occurred
in IO data com-
munications with
the NX Units.
• An NX Unit is not mounted
properly.
• An NX Unit has failed.

P. 12-25
84C10000
hex
NX Unit Ini-
tialization
Error
Initializing an NX
Unit failed.
• An error occurred in pro-
cessing the Communication
Coupler Unit.
• An initialization error
occurred in an NX Unit.
• The Channel Enable/Dis-
able Setting for all channels
of the Analog Input Unit are
set to
Disable
.
The Enabled Channel Set-
tings for all channels of the
Analog Output Unit are set
to
Disable
.

P. 12-26
Event code
Event
name
Meaning Assumed cause
Level
Reference
Maj Prt Min Obs Info