Omron PROFINET NX-PNC202, Руководство пользователя

Страница: 217 / 282

11 - 25
11 PROFINET Coupler Unit Functions
NX-series PROFINET Coupler Unit User’s Manual (W623)
11-6 Changing Event Levels
11
11-6-3 Procedure to Change an Event Level
Use the Sysmac Studio to change an event level. The operations are described by using the Sysmac
Studio as an example. For Support Software other than the Sysmac Studio, refer to the operation man-
ual for the Support Software that you are using.
After you change an event level, always transfer the operation settings to the Controller.
1
On the Edit IO Device Terminal Configuration Tab Page, select the Unit for which to change the
event level and click the Unit Operation Settings button.
The Edit Unit Operation Settings Tab Page is displayed.
2
From the events for which Level setting is displayed, select the event for which you want to
change the level, and then select a level from the list in the Value field.
11-6-3 Procedure to Change an Event Level