Omron OMNUC G5, Руководство пользователя, Страница: 419 / 550

8-54
8-6 Extended Parameters
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
8
Parameters Details
Explanation of Set Values
Œ
Select the signal read cycle for the pulse prohibition input signal (IPG).
Œ
The signal status is updated when the signal status in each signal read cycle that has been set
matches multiple times.
Œ
You can lower the possibility of incorrect operation caused by noise by extending the signal read
cycle. However, the responsiveness to signal inputs will be reduced.
Explanation of Set Values
Œ
Select the setting unit of Positioning Completion Range 1 and 2 (Pn431 and Pn442), and Error
Counter Overflow Level (Pn014).
Pn519
Command Pulse Prohibition Input Read Setting
Setting
range
0 to 3 Unit
−
Default
setting
Power OFF
and ON
−
Position
Full closing
Set
value
Explanation
0 0.166 ms
1 0.333 ms
2 1 ms
3 1.666 ms
4 0.166 ms (No judgment of multiple matches)
Pn520
Position Setting Unit Selection
Setting
range
0 to 1 Unit
−
Default
setting
Power OFF
and ON
Yes
Position
Full closing
Set
value
Explanation
0 Command unit
1 Encoder unit