manualshive.com logo in svg

Omron NYP17-*-11 SERIES, Руководство пользователя

Поделиться
Скачать
Omron NYP17-*-11 SERIES Скачать руководство пользователя страница 227

7-2-8

Allocate a Drive in Windows

An added drive must be allocated before it becomes visible in Windows.
To allocate a drive in Windows:

1

Ensure the Panel PC is ON.

2

Select the Windows 

Start

 Button.

3

In the search field, input 

partition

.

4

Select 

Create and format hard disk partitions

.

The Disk Management window opens. The new disk is displayed with a storage space

Unallocated

.

5

Right click on the unallocated space and select 

New Simple Volume

.

The New Simple Volume Wizard opens.

6

Follow the steps in the New Simple Volume Wizard.

The drive is installed and ready for use in Windows under the configured drive letter.

Additional Information

Do not format, resize or change settings for partition C:. Windows is installed on drive partition
C: and any change to this partition can cause Windows to stop working.

7 Maintenance

7 - 37

NY-series Industrial Panel PC User's Manual (W555)

7-2
 Corrective Maintenance

7

7-2-8 Allocate a Drive in Windows

Содержание NYP17-*-11 SERIES









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды