Omron NYP17-*-11 SERIES, Руководство пользователя

Страница: 226 / 264

Repair Windows with the System Repair Disk
Use the following procedure to repair the Windows operating system with a System Repair Disk.
Ensure:
• The Industrial Panel PC is powered OFF.
• A System Repair Disk is created earlier and it is available.
To perform a system repair:
1
Connect a USB keyboard, a USB mouse and a USB external DVD drive to the Industrial Panel
PC.
2
Power ON the Industrial Panel PC and immediately press the F11 key repeatedly.
3
Insert the System Repair Disk in the DVD drive.
4
Select DVD Drive as boot device and press Enter .
The message Windows is loading files ... and a progress bar appear.
5
Press any key to start and wait until the recovery software started.
6
Select your keyboard language and then select Next .
The System Recovery Options window appears.
7
Select Restore your computer using a system image that you created earlier and select
Next .
8
Select Use latest available system image and then select Next .
The Re-Image Your Computer window appears.
9
Do not change the setting to restore C: , select Next .
10
Review the settings and select Finish .
11
Wait until the repair process is finished, this can take several hours.
12
Restart the Industrial Panel PC.
Windows is repaired.
Additional Information
• Refer to http://windows.microsoft.com/ for System repair details.
• Refer to
Create a Windows System Repair Disk on page 5 - 60 for System Repair disk crea-
tion.
• Refer to 5-9 Create Backup and Repair Data on page 5 - 57 for Backup creation.
7 Maintenance
7 - 36
NY-series Industrial Panel PC User's Manual (W555)