manualshive.com logo in svg

Omron NYP17-*-11 SERIES, Руководство пользователя

Поделиться
Скачать
Omron NYP17-*-11 SERIES Скачать руководство пользователя страница 205

7-2-2

Remove the Cover

The Cover of the Industrial Panel PC provides access to the following items.
• Battery
• Fan Unit (applies to products with active cooling)
The inside of the Cover contains the following information.
• Battery replacement date
• License key for the operating system (optional)
No tools are required to open the Cover.
Use the following procedure to remove the Cover of the Panel PC.

1

Power OFF your Panel PC if it has active cooling.

Precautions for Safe Use

Do not remove the fan cover while the power is ON. Contact with the rotating fan may result in
injury.

2

Remove the Cover.

1

3

2

(1) Pull the lever 

1

 to unlock the Cover.

(2) Lift the side 

2

 to tilt the Cover.

(3) Remove 

3

 the complete Cover.

The Cover is removed.
To mount the Cover, position the side of the Cover in the Panel PC and push the cover in place.
The lever will lock in place.

7 Maintenance

7 - 15

NY-series Industrial Panel PC User's Manual (W555)

7-2
 Corrective Maintenance

7

7-2-2 Remove the Cover

Содержание NYP17-*-11 SERIES









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды