manualshive.com logo in svg

Omron NYP17-*-11 SERIES, Руководство пользователя

Поделиться
Скачать
Omron NYP17-*-11 SERIES Скачать руководство пользователя страница 169

5-7-2

Firewall

An industrial network should be separated from an office network.
Depending on the operating system a Firewall is preinstalled.
• For Windows 10 the standard firewall software is installed and enabled.
• For Windows 7 the Firewall software is not installed.

Precautions for Safe Use

• Separate the machine network segment from the office network to avoid communication fail-

ures.

• Install all updates and ensure the firewall stays up-to-date.

Additional Information

Check the IT policy of your company for available software and for details on the software envi-
ronment the Industrial Panel PC will operate in.

5-7-3

Anti-virus Software

The Windows operating system is vulnerable for viruses. Anti-virus software should be installed on the
Windows operating system.
Depending on the operating system Anti-virus software is preinstalled.
• For Windows 10 the standard Anti-virus software is installed and enabled.
• For Windows 7 Anti-virus software is not installed.

Additional Information

Check the IT policy of your company for available software and for details on the software envi-
ronment the Industrial Panel PC will operate in.

Precautions for Safe Use

• Make sure that your operating system environment is protected against malicious software

and viruses.

• Install all updates and ensure virus definitions stay up-to-date.

5 Installation

5 - 49

NY-series Industrial Panel PC User's Manual (W555)

5-7 Install Software

5

5-7-2 Firewall

Содержание NYP17-*-11 SERIES









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды