manualshive.com logo in svg

Omron NYP17-*-11 SERIES, Руководство пользователя

Поделиться
Скачать
Omron NYP17-*-11 SERIES Скачать руководство пользователя страница 105

I/O Connector Power Status Output Details

This section provides details of the Power Status Output relay.
The Power Status Output is a relay between pin 1 and 2 of the I/O Connector.

Power ON Power Status Output Operation

This section provides power ON details of the Power Status Output operation.
The Power Status Output turns ON to indicate that the system has been shut down and the power
supply to the Panel PC can be turned OFF.
If power is not turned OFF, the Power Status output will turn OFF when the Panel PC is turned ON.

The Power Status Output is ON 

A

 when the Panel PC has been used and has not been discon-

nected from the power supply.

The Power Status Output is OFF 

B

 when the Panel PC has been disconnected from the power

supply.

Power up
start

Power supply has
been disconnected

Open (OFF)

Closed (ON)
Relay

Open (OFF)

Closed (ON)
Relay

A

B

Product ON

Product OFF

Additional Information

Refer to 

5-4-4 Wire the I/O Connector

 on page 5 - 37 for I/O connector wiring details.

Power OFF Power Status Output Operation

This section provides power OFF details of the Power Status Output operation.
The Power Status Output turns ON to indicate that the system has been shut down and the power
supply to the Panel PC can be turned OFF.

If power is not turned OFF, the Power Status output will stay ON 

A

. It will turn OFF when the

Panel PC is turned ON.

If power is turned OFF, the Power Status Output will turn OFF 

B

.

4 Specifications

4 - 15

NY-series Industrial Panel PC User's Manual (W555)

4-2 Connector Specifications

4

4-2-2 I/O Connector Specifications

Содержание NYP17-*-11 SERIES









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды