Omron NYP - 1 Series, Руководство пользователя по оборудованию

Страница: 187 / 266

Periodically but at least every 6
months
Reference
For a cooling layer with removable
cover:
•
Check the battery replacement
date.
•
Replace the battery before the
replacement date.
•
Refer to 7-2-2 Remove the Cover on page 7-8 to check the label.
•
Refer to 7-2-4 Replace the Battery on page 7-11 to replace the bat-
tery.
Check the backup and repair me-
dia. Refer to NY-series Operating Systems and Software Utilities Manual (Cat.
No. W616) for details.
When the Industrial Panel PC is
not powered for 6 months
Reference
For a cooling layer with removable
cover and active cooling:
•
Confirm both fans rotate immedi-
ately after Power ON.
•
Replace the Fan Unit when the
fans do not rotate smoothly.
Refer to 7-2-3 Replace the Fan Unit on page 7-9 to replace the Fan
Unit.
7-1-2
Clean the Touchscreen Surface
Clean the touchscreen surface of the Industrial Panel PC when necessary to keep it in the best oper-
ating condition.
• Ensure the Industrial Panel PC is OFF before cleaning.
• Wipe the Industrial Panel PC daily with a dry, soft cloth. If the touchscreen is very dirty and you try to
clean it with a dry cloth, you may scratch the surface. Use a damp cloth first to remove the dirt.
• When a spot cannot be removed with a dry cloth, dampen the cloth with a neutral cleanser, wring
out the cloth and wipe the touchscreen surface.
• Remove all residue from gum, vinyl or tape when cleaning.
Precautions for Correct Use
Turn OFF the product or disable the touchscreen for cleaning.
Additional Information
Allowed cleaning materials for the touchscreen surface:
• Isopropyl alcohol
• Detergents between pH 5 and pH 8
Rinse with demineralized water after cleaning
• Demineralized water
7 Maintenance
7-3
NY-series Industrial Panel PC Hardware User's Manual (W555)
7-1 Preventive Maintenance
7
7-1-2
Clean the T
ouchscreen Surface