Omron NYB17-11, Руководство пользователя

Страница: 114 / 244

5-2 Install Options
This section describes the installable options for the Industrial Box PC.
5-2-1
Install a Drive
A drive is a storage device for the Industrial Box PC.
Additional Information
• Depending on the product configuration a drive is already installed.
Refer to 1-4 Product Configuration on page 1 - 5 for storage details.
• Depending on the CPU type one or two drives are supported.
Refer to 4-1-4 CPU Specifications on page 4 - 6 for the number of supported drives.
• Refer to 2-9-4 Storage Devices on page 2 - 18 for the recommended drive models.
• Refer to 4-1-6 Storage Device Specifications on page 4 - 8 for drive specifications.
Prepare the following items:
• The drive
A drive is not supplied with the Box PC.
• The drive bracket with mounting screws
These are supplied with the Box PC.
To install a drive:
1
Ensure the Box PC is OFF.
2
Remove the drive cover.
1
3
2
(1) Push the lock lever 1 .
(2) Tilt the drive cover
2
.
(3) Remove the drive cover
3
.
5 Installation
5 - 6
NY-series Industrial Box PC User's Manual (W553)