Omron NYB17-*100 SERIES, Руководство пользователя

Страница: 146 / 194

5-8-1
Connect UPS Using the USB Connector
The Simple Shutdown Software monitors the UPS status via the USB interface and shuts down the
Box PC Without Operating System when needed.
UPS Drivers and the required software can be downloaded from the OMRON download site:
• Drivers for the S8BA UPS
• Installation files for the Simple Shutdown Software
• Installation files for the UPS Setting Utility (Windows only)
Precautions for Safe Use
• Always use an uninterruptible power supply (UPS) to prevent data loss and other system file
integrity issues caused by unexpected power interruption.
• Use an Omron S8BA UPS with the correct revision number to prevent improper system shut-
down.
• Correctly perform wiring and setting, and ensure that the shutdown by the UPS can be exe-
cuted.
Follow the steps below to connect the S8BA UPS with a USB cable and to configure it correctly.
1
Ensure the revision number of the UPS is correct.
Refer to
2-9-10 UPS on page 2 - 24 for more information.
2
Download the above mentioned software.
3
Wire the S8BA UPS.
(1) Wire the input of the UPS to the output of the Power Supply.
(2) Wire the output of the UPS to the power connector of the Box PC.
(3) Ground the UPS.
(4) Connect the USB port of the S8BA UPS to the USB port of the Box PC using the USB
cable provided with the S8BA UPS.
USB
USB
Industrial PC
Input
24 VDC
Power Supply (S8VK)
AC (L)
AC (N)
24 VDC
0 VDC
UPS (S8BA)
Output
Refer to the UPS S8BA User's Manual (Cat. No. U702) for details.
Refer to 5-4-3 Wire the Power Connector on page 5 - 36 for Power Connector details.
4
Supply power to the Power Supply.
5 Installation
5 - 50
NY-series Industrial Box PC Without Operating System User's Manual (W586)