Omron NY532-1*00-111*13**0, Руководство пользователя, Страница: 170 / 214

7-1-2
Clean the Touchscreen Surface
Clean the touchscreen surface of the IPC Machine Controller when necessary to keep it in the best
operating condition.
• Ensure the IPC Machine Controller is OFF before cleaning.
• Wipe the IPC Machine Controller daily with a dry, soft cloth. If the touchscreen is very dirty and you
try to clean it with a dry cloth, you may scratch the surface. Use a damp cloth first to remove the dirt.
• When a spot cannot be removed with a dry cloth, dampen the cloth with a neutral cleanser (an ap-
proximately 2% solution), wring out the cloth, and wipe the IPC Machine Controller.
• Remove all residue from gum, vinyl or tape when cleaning.
Precautions for Correct Use
Turn OFF the product or disable the touchscreen for cleaning.
7-1-3
Clean the Panel PC
Clean the Panel PC periodically in order to keep it in the best operating condition.
Wipe the Panel PC with a dry, soft cloth.
Precautions for Safe Use
Do not use corrosive substances to clean the product.
Doing so may result in the failure or malfunction.
7 Maintenance
7 - 4
NY-series Industrial Panel PC Hardware User's Manual (W557)