Omron NY532-1*00-111*13**0, Руководство пользователя, Страница: 103 / 214

EtherCAT Connector Specifications
The EtherCAT connector is assigned to the Machine Controller Software.
This port can be used for communication between the Machine Controller Software and EtherCAT
Slaves. This port acts as an EtherCAT master.
Specifications for Units with Machine Controller Software.
Item Specifications
Ethernet connector number 3
Communications standard IEC 61158 Type 12
EtherCAT master specifications Class B (Feature Pack Motion Control compliant)
Physical layer 100BASE-TX
Modulation Baseband
Baud rate 100 Mbps (100BASE-TX)
Duplex mode Auto
Topology Line, daisy, chain and branching
Transmission media Twisted pair cable of category 5 or higher (double-shielded
straight cable with aluminum tape and braiding)
Maximum transmission distance between nodes 100 m
Maximum number of slaves
192
Range of node addresses that can be set 1 to 512
Maximum process data size Input: 5,736 bytes, Output 5,736 bytes, the maximum number
of process data frames is 4
Maximum process data size per slave Input 1,434 bytes, Output 1,434 bytes
Communications cycle 500 µs to 8 ms in 250 µs-increments
Sync jitter 1 µs max.
4 Specifications
4 - 17
NY-series Industrial Panel PC Hardware User's Manual (W557)
4-2 Connector Specifications
4
4-2-4 Ethernet Connector Specifications