manualshive.com logo in svg

Omron NX1P2 series, Руководство пользователя по оборудованию

Поделиться
Скачать
Omron NX1P2 series Скачать руководство пользователя страница 101

Battery-related Error Detection and Clock Data Settings

Because the CPU Unit is shipped with the battery not mounted, the 

Battery-related error detection

 is

set to 

Do not use

 by default.

The behavior of the CPU Unit when a battery-related error is detected depends on whether battery er-
ror detection is used or not used as shown in the table below.
When the battery is not mounted, you can set the 

Battery-related error detection

 to 

Do not use

 to

suppress battery errors.
When the battery is mounted, however, you can set the 

Battery-related error detection

 to 

Use

 to de-

tect battery errors.

Cause of error

What is af-

fected

Behavior

When the Battery-related error

detection is set to Do not use

When the Battery-related error

detection is set to Use

One of the following was detected
at power ON.

•

Built-in capacitor discharged

•

Battery not mounted

•

Mounted battery discharged

Clock data

•

In case of clock oscillator stopping
Time measurement starts from January 1st, 1970.

•

In case of low battery voltage
Time measurement continues.

Error detection

No error is detected.

The following error is detected.

•

Low Battery Voltage

•

Real-Time Clock Stopped

One of the following was detected
after power ON.

•

Battery was removed

•

Mounted battery discharged

Clock data

Time measurement continues.

Error detection

No error is detected.

The following error is detected.

•

Low Battery Voltage

When you mount the battery, set the 

Battery-related error detection

 to 

Use

.

The measurement of clock data starts from January 1st, 1970 if the clock oscillator stops. If this oc-
curs, readjust the CPU Unit’s clock data to the current time.
In order to use the clock data for programming, you need to use system-defined variables to read the
presence or absence of the Low Battery Voltage and Real-Time Clock Stopped errors and confirm that
the clock data is normal.
Refer to the 

Sysmac Studio Version 1 Operation Manual (Cat. No. W504)

 for battery-related error de-

tection and clock data settings.

3 Configuration Units

3-19

NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)

3-1 CPU Units

3

3-1-5

 Battery

Содержание NX1P2 series









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды