Omron NJ501-4300, Руководство пользователя

Страница: 314 / 336

Appendices
A - 6 NJ-series NJ Robotics CPU Unit User’s Manual (W539)
The 3D Equipment Model Creation Wizard allows you to select how many conveyors for picking, how
many conveyors for placing, and how many robots to use for the target pick-and-place application to
configure 3D machine models for conveyors and robots.
After you complete the settings in this wizard, calibration parameters that represent the coordinate
transformation data for each 3D machine model is generated automatically.
For detailed operating procedures, refer to the Vision & Robot Integrated Simulation Startup Guide
(Cat. No. Y128).
Use this window to set the configuration of a 3D equipment model that consists of conveyor settings,
the number of robots, and other information.
A-1-3 3D Equipment Model Creation Wizard
3D Equipment Model Settings
Symbol Name Description
(A) 3D equipment model con-
figuration pattern selection Select the conveyor configuration from among 1 conveyor for pick-
ing and 1 conveyor for placing , 1 conveyor for picking and 2
conveyors for placing , 2 conveyors for picking and 1 conveyor
for placing , and Custom setting .
(B) 3D equipment model
image display This area displays the image of the pattern selected in the 3D equip-
ment model configuration pattern selection area.
(C) Number of robots specifi-
cation Select the number of robots.
(D) Start Button and Cancel
Button
Click the Start Button to start the wizard with the settings of the
selected conveyor configuration and the specified number of Del-
ta3/Delta3R robots.
Click the
Cancel Button to close the window.
(A)
(C)
(B)
(D)