Omron NJ101-10 Series, Руководство пользователя

Страница: 75 / 280

3-1-4
Settings Required for EtherCAT Communications
For EtherCAT communications, you must set the following network configuration information from the
Sysmac Studio and download it to the CPU Unit.
• Network configuration: Master and slave configuration
• EtherCAT master settings: Parameters settings, such as the Fail-soft Operation Setting or Wait Time
for Slave Startup
• Process data information: Allocation information for slave PDO data
Additional Information
EtherCAT communications cannot be performed unless the correct network configuration infor-
mation is downloaded to the CPU Unit.
Refer to
Section 5 Setting Up EtherCAT Communications with the Sysmac Studio on page
5-1 for details.
3 EtherCAT Communications
3-7
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
3-1 EtherCA
T Communications T
ypes and Settings
3
3-1-4
Settings Required for EtherCA
T Communications