Omron NC1-510000, Руководство пользователя

Страница: 147 / 188

6-2 Power OFF
This section provides Power OFF details.
Before following power OFF procedures below, check that the AMR Controller is ON by examining the
LED indicators on the AMR Controller.
6-2-1
Power OFF Using the Power Button
1
Ensure all programs are closed.
If required close all active programs.
2
Press and release the power button on the AMR Controller within 1 second.
The AMR Controller will shutdown.
Note that this behaviour of can be reconfigured with the Power Options settings.
Refer to
3-4 Power Button on page 3-11 for power button location information.
3
Wait until the PWR LED is OFF.
The AMR Controller is powered OFF.
Additional Information
The AMR Controller will restart automatically if a UPS is connected to the I/O connector of the
AMR Controller. Use the Power button of the UPS or remove the input power from the UPS for
a normal shutdown of the AMR Controller.
6 Operating Procedures
6-3
AMR Controller User's Guide (I650)
6-2 Power OFF
6
6-2-1
Power OFF Using the Power Button