72
5.
Other Functions
5.9 Initialize
There are three different types of initialization.
(1) Resetting the active energy for each circuit
(2) Resetting the active energy for all circuits
(3) Resetting the active energy and setting values for all circuits
• Setting values remain unchanged if you do either (1) or (2).
• The settings for each of the circuits are also reset if you do (3). The unit restarts after you do this.
■
Resetting the active energy for each circuit (example: resetting circuit A)
If a measured value is displayed, press and hold the [<</MODE] key and enter your password to switch to the setting
mode.
1
From the circuit A setting items, press the [
][
] keys to move to "Active energy reset (MENU A7)".
2
When you press and hold the [ENTER] key, the dashes (-) reduce from the left side of the main screen.
3
Keep pressing the [ENTER] key.
4
When the dashes (-) disappear, and "DONE" flashes on the screen, the active energy for Circuit A has
been reset.
After completing initialization, "MENU 07" is displayed again.
Information
• The MENU No. for resetting active energy values for circuits B to D are circuit B "B7", circuit C "C7", and circuit D
"D7" .
H
W
o
e
n
o
d
7
A
H
W
o
-
7
A
H
W
o
-
-
-
7
A
H
W
o
-
-
-
-
-
7
A
-
A
-
1
0
1
3
4
2
